Review and Analysis of WiMAX Technology using different Modulation scheme with AWGN Channel

The last few decades, there has been a incredible growth in the wireless communication technology. The growing demand of multimedia services and the growth of Internet related contents lead to increasing interest to high speed communications. The Wireless communication technology, affordable wireless service has become a reality. In wireless communication, radio propagation refers to the behavior of radio waves when they are propagated from transmitter to receiver. 

In the course of propagation, radio waves are mainly affected by three different modes of physical phenomena: reflection, diffraction, and scattering. In this paper, we analysis of MIMO-OFDM system employing different Modulation scheme is analysed using AWGN channel. The Simulation results show that this is a novel technique for next generation wireless systems using MATLAB toll R2013a. 

By Arvind Yadav | Er. Praveen Kumar Patidar"Review and Analysis of WiMAX Technology using different Modulation scheme with AWGN Channel"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11662.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11662/review-and-analysis-of-wimax-technology-using-different-modulation-scheme-with-awgn-channel/arvind-yadav

open access journal of engineering, ugc approved journals for engineering, special issue publication

Novel Algorithm for Multi-document Summarization using Lexical Concept

Text summarization is the necessity of the society as we are surrounded my various documents which if summarized will not only save our time and but also let us to go through more number of documents in the same time. In this paper we presented the a novel approach for multiple document summarization using the lexical chains with taken into concern the adjective, adverbs , nouns etc.. ,for the formation of the lexical chains. Together with that the better approach is used for the tagging which results in better results for recall when compared the results with the base paper. 

By Srashti Garg | Dr. Akash Saxena"Novel Algorithm for Multi-document Summarization using Lexical Concept"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11644.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11644/novel-algorithm-for-multi-document-summarization-using-lexical-concept/srashti-garg

international journals in engineering, paper publication for engineering, conference issue publication

Waste Water Generating Electricity by Using Microcontroller

Hydropower is one of the most promising available energy sources in the world. It accounts for almost 16 percent of global electricity consumption. It is clean and renewable energy source as compared to fossil fuel based generation which pollute environment. At the time of floods there will be a huge flow which will causes damage to the plant, inefficient power generation. So these are avoided by using automation. Before the existence of the automation, qualified personnel operated the equipment manually. 

This was called Manual System. By incorporating automation in hydro power plant, it reduces the manual labor as well as increases the efficiency of the operations performed like providing more flexibility of changing the mode of operation, for example, Power Control, Level Control. It enables to control the plant from a remote area. 

This paper deals with the use of micro controller for control and automation of hydro power plant, its advantage and cost effectiveness. Here, we are using wired method to transmit measured generated power and water level in the water reservoir along with a controller for automation of opening and closing of shutter for emergency purpose. 

By Prof. M. R. Dhavale | Prof. S. J. Kulkarni | Prof. S. N. Jadhav"Waste Water Generating Electricity by Using Microcontroller"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11654.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11654/waste-water-generating-electricity-by-using-microcontroller/prof-m-r-dhavale

manuscript publication, submit paper online, indexed journal

Transcription Management System

Transcription Management System automates an entire workflow of voice and transcripts files with a very simple and easier manner. The complete synthesis is based on interactive voice response where user can record their information in terms of audio file. Recent Admission Management Systems are often being breached for the visually impaired persons. They need to depend on another person for filling any kinds of forms. So our project helps such kind of people to fill their forms by recording voice. Any kind of user can utilize this system and reduce their time by storing data in wave format instead of typing via keyboard. 

Filling Admission forms can be done by Transcription Management System with a smart indication. This composition can be used in any application, where person's vision is the critical issue. The features of this system are automatic transmission of voice files with just a couple of click .By just simple mouse clicks and speech inputs the system is easy to get along with any type of users ; there is no need to remember keyboard. This system works on role basis like Translator, Manager and Reviewer .The visually impaired persons need not worry as they can listen to the prompting done by the system and perform respective actions. 

By Pallavi Deshmukh | Lalita Shinde | Namrata Ahire | Sayli Kamod"Transcription Management System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11433.pdf 

Direct URL: http://www.ijtsrd.com/engineering/computer-engineering/11433/transcription-management-system/pallavi-deshmukh

high impact factor, ugc approved journals for engineering, special issue publication

Experimental Analysis of Automotive Exhaust Heat Exchanger for Thermal Uniformity

The I.C. Engines are losing large amount of heat into environment directly. This waste heat can be reused for other purpose like TEG, Air conditioning etc. A heat exchanger is a device that is used to transfer thermal energy between two or more fluids, between a solid surface and a fluid, or between solid particulates and a fluid, at different temperatures and in thermal contact. In case of TEG there is need to have temperature uniformity on surface of heat exchanger is important. So, it is important design achieve thermal uniformity for converting the heat into other form of energy effectively. 

By Mr. Jadhav Vishal | Mr. D. S. Patil"Experimental Analysis of Automotive Exhaust Heat Exchanger for Thermal Uniformity"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11702.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/11702/experimental-analysis-of--automotive-exhaust-heat-exchanger-for-thermal-uniformity/mr-jadhav-vishal

high impact factor, ugc approved journals for engineering, special issue publication

GSM Based Automated Fat Detection and Billing System

India is Farming country. The main source of earning money is farming the side business for farmer is milk collection. This collected milk is given to the dairy industry without any processing. So we are making a system which will going to change the lifestyle of Indian farmer. Dairies collect milk from farmer everyday and payments for this milk are done according to rates per liter. This rate depends on various factors like weight, CLR, SNF of the milk. We develop a system that will measure the fat content in the milk and calculate the payment automatically. And the cost of the milk will send to that farmer via message automatically.[1] 

By Miss. Smita Ganechari | Miss. Sneha Ghode | Miss. Shaheen Choudhari | Prof. Dashavant S. J"GSM Based Automated Fat Detection and Billing System"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11583.pdf 

Direct URL: http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11583/gsm-based-automated-fat-detection-and-billing-system/miss-smita-ganechari

international peer reviewed journal,paper publication for engineering,  conference issue publication

Optimization of Dry End Milling Process Parameters of Al-6063 Alloy Using Taguchi Method

This paper presents on optimizing the end milling process parameters based on the Taguchi method to minimize surface roughness and Tool wear for the work piece of Al-6063 alloy with high speed steel. The input parameters are speed (rpm), feed rate (mm/min) and depth of cut (mm). S/N ratio is calculated by using Taguchi method under the L9 orthogonal array (OA) with 3 factor and 3 levels. This S/N ratio is analysed by analysis of variance (ANOVA),and also find out the effects of control factor with help of analysis of variance. Finally, Results shown that, Taguchi design is the significant method to optimizing the milling process parameters of Speed 1200 rpm with 20% Significant. 

By Arun K K | Ponnuswamy D"Optimization of Dry End Milling Process Parameters of Al-6063 Alloy Using Taguchi Method"

Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018,

URL: http://www.ijtsrd.com/papers/ijtsrd11643.pdf 

Direct URL: http://www.ijtsrd.com/engineering/mechanical-engineering/11643/optimization-of-dry-end-milling-process-parameters-of-al-6063-alloy-using-taguchi-method/arun-k-k

peer reviewed journals, manuscript submission, call for paper engineering